|
Modular touch-panel systems based on new ARM9 module
2011-07-18 Article Rating:  / 3
Techsol released two Linux-ready, computer modules incorporating ARM9-based, 454MHz Freescale i.MX233 and i.MX283 system on chips (SoCs). The TSCM-233 is based on the i.MX233 SoC and offers 64MB of DDR RAM, while the similar, Ethernet-enabled TSCM-283 is based on the i.MX283 and includes 128-256MB DDR2 memory, and both are available with optional I/O boards and display subsystems.
Delta, British Columbia-based Techsol (Technical Solutions Inc.) offers embedded board and development services, as well as Linux development tools for its Medallion touch panels. The company has been around for 16 years now, and has offered customizable, production-ready embedded modules, boards, and devices based on its ARM9-based Medallion module for the last 12.   TSCM-233, front and back Techsol has now launched a new module line called the TSCM, which like the Medallion, is available separately or as part of a modular touchscreen system. The TSCM line is still based on ARM9 processors, but they're much faster. The Freescale Semiconductor i.MX233 announced in 2009 and the similar (though Ethernet- and DDR2-enabled) iMX283 announced in 2010 both move up to a 454MHz clock rate. Both SoCs are touted for offering 500 MIPS performance, as well as mixed-signal technology such as analog audio, integrated power management, and a monaural audio amplifier.   TSCM-283, front and back The 3.4 x 2.4-inch TSCM modules are available with optional I/O boards and a choice of display subsystems. These stack together with the module and the display itself to create a touch-panel computer for as little as $144, says Techsol. The boards are said to connect to the modules via "simple, low-cost 2 mm dual-row headers." All that's needed is the enclosure and the application software, says the company (see farther below for more on these options).   TSCM-233 and TSCM-283 block diagrams (Click on either to enlarge) Both modules support 18-bit direct-wire for TFT LCDs, as well as four-wire resistive touch input, says Techsol. I/O is said to include interfaces for USB host and device ports, as well as two UARTs, SPI, GPIO, and I2C. The TSCM-283 adds a 10/100 Ethernet MAC with optional PHY, says the company. Features and specifications listed for the TSCM-233 and TSCM-283 include:
The I/O drivers are said to include various drivers for USB input devices, including USB-based Wi-Fi adapters. The Medallion distribution also offers various GUI options, as well as HTTP servers and security features, says the company. I/O and display optionsA "stock" I/O board for the TSCM modules is available to extend many of the modules' I/O connections with real-world ports. Features and specifications are said to include:
Availability The TSCM-233 module is available for $49 in 1K quantities, and the TSCM-283, featuring Ethernet and twice the memory, starts at $59, says Techsol. The optional I/O board in loaded configuration sells for $49 at 1K quantities. The LCDs with adapter/mounting boards start at $36 for 3.5-inch or 4.3-inch models, with higher prices for five-, seven-, and 10.4-inch models. A three-piece modular set with a TSCM-283 with 128MB RAM, 128MB NAND flash, a loaded I/O board, and a 4.3-inch LCD with LED backlight and touch-panel costs $144, says the company. Moving up to a seven-inch WVGA display would bring the full-kit cost to $162. More information on the TSCM-233 may be found on Techsol's TSCM-233 page, and more on the TSCM-283 may be found on its TSCM-283 page. Related Stories:
|
news feed
